Place of Origin:
China
Brand Name:
RY
Certification:
CE,ROHS
Model Number:
BY-GPS-L1-L2
Contact Us
Custom L1 L2 GPS Antenna 1575.42MHz 1227MHz Ceramic Double Layer Patch Bulit In Antenna
Background technology:
In recent years, with the development of satellite communication technology, the rapid growth of satellite communication business and satellite mobile communication, the lower frequency band of microwave in the past has become crowded. Therefore, Ku band or even Ka band communication is used in satellite communication to meet the demand of large amount of information. In some special application fields, such as mobile communication and navigation communication, the antenna is required to have the characteristics of good concealment and strong mobility. However, the traditional antenna is no longer suitable for the needs of modern satellite communication system because of its large size, poor mobility, difficult to be conformal with the carrier and easy to expose the target. The modern satellite communication system puts forward higher requirements for the antenna, which not only requires miniaturization, light weight, good concealment and mobility, but also requires dual polarization, multi frequency and bandwidth characteristics in order to meet the needs of large capacity communication. The characteristics of the antenna are closely related to the dielectric substrate, so choosing the appropriate dielectric substrate is the key to design the antenna Find the basis of the antenna.
In order to effectively increase the Q value of microstrip antenna and broaden the working frequency band, it is necessary to choose the dielectric substrate with lower dielectric constant and thicker thickness as far as possible; for the feed network, choosing the thinner substrate will effectively reduce the pseudo radiation from the feeder, enhance the binding effect of the dielectric on the wave and increase the energy coupling efficiency. Therefore, when selecting the dielectric substrate, according to the specific application, it is necessary to first consider the multiple parameters of the substrate, such as dielectric constant, dielectric thickness, loss tangent, etc., and then consider the multiple properties of the dielectric substrate, such as the uniformity of the substrate thickness, the stability of the substrate with the change of humidity and temperature, the chemical resistance, tensile strength and structural strength, flexibility, impact resistance and workability of the substrate Adhesion, etc.
Therefore, it is necessary to develop a new ceramic substrate and antenna to meet the needs of modern communication technology.
Electrical Characteristics:
Technical implementation elements:
In order to overcome the shortcomings of the prior art, the utility model aims to provide a double-layer ceramic substrate and an antenna suitable for multi frequency bands.
In order to solve the technical problems in the background technology, the utility model provides a double-layer ceramic substrate, including a first substrate and a second substrate, the first substrate and the second substrate are square, the first substrate and the second substrate are adhered together; the first substrate has a first through hole, a second through hole and a first tangent angle, and the side length of the first substrate is 25 ± 0.10 mm The second substrate has a blind hole, a third through hole and a second cut angle, the side length of the first substrate is 18 ± 0.10 mm and the thickness is 2-4 mm.
Furthermore, the center of the first substrate is in a straight line with the center of the second substrate.
Furthermore, the first through hole, the second through hole, the blind hole and the third through hole are all arranged on the middle vertical line of the square.
Furthermore, the distance between the first through hole and the center of the square is 1.5mm, the distance between the second through hole and the center of the square is 2.1mm, the distance between the blind hole and the center of the square is 2.1mm, and the distance between the third through hole and the center of the square is 1.5mm.
Furthermore, the center of the first through hole is in a straight line with the center of the third through hole, and the center of the second through hole is in a straight line with the center of the blind hole.
Furthermore, the central distance between the first through hole and the second through hole is 3.6 mm, and the central distance between the blind hole and the third through hole is 3.6 mm.
Specifically, the diameter of the first through hole is 2.4 ± 0.01mm, the diameter of the second through hole is 1.0 ± 0.01mm, the diameter of the blind hole is 1.5 ± 0.01mm, and the diameter of the third through hole is 1.0 ± 0.01mm.
Furthermore, there is at least one of the first tangent angle and the second tangent angle.
Further, the first chamfer is a fillet or chamfer, and the second chamfer is a fillet or chamfer.
Product Details:
Our Company:
1. RY Electronics has over 10 years of experience designing and manufacturing custom cable assemblies and antennas in large or small volumes depending on your needs.
2. Quality is important for us and for the customer, the client’s demand is more supreme. We create an easier, less costly and extremely satisfactory way of business. Striving to achieve improving results through our continuous innovating and technical engineer’s effort, we create values to turn the antenna / Cable / Harness to your exact demand.
3. We guarantee every antenna / Cable / Harness we offered must be tested by network analyzer / Precision Low Voltage Wire Tester to ensure the perfect quality before delivery. Cooperated with many overseas clients from over twenty countries, we will be your ideal OEM/ODM partner.
Our Advantages:
1. Nearly 10 years of rich marketing experience and has sufficient supplies and materials.
2. Financially sounded and has the continuous line service from R&D to designing, manufacturing and marketing.
3. Our products have a wide field of applications including industry, communication, information, automobiles, computer peripherals.
4. Competitive price,We devote ourselves in providing products with market differentiation and high performance.
5. We reduce the impact and damages caused to the environment, abide international environmental regulations and seek to be green and eco-friendly.
FAQ:
1. When can I ?
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
2. Do you have stock?
We don’t have stock; we’ll start production after receiving PO.
3.What's information do you need for quoting?
For Cable harness, please advise cable specs, part number, or send drawings.
For Connectors, please kindly advise series pins, male or female, molded, field assembly panel mount type and cable length.
4. What's your payment terms?
100 % T/T before delivery
5. What is your terms of delivery?
We are accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or most cost-effective for you.
Packaging & Shipping:
1. Usually we ship your order by sea or by air.
2. We do our best to ship your order within 1 week after receiving your payment
3. We'll tell you the tracking number once your order has been sent.
4. We accept T/T Bank transfer, L/C, Western Union, Moneygram, Paypal.
Send your inquiry directly to us